Snow Blower Skid Size Chart

Click on a thumbnail/image to see more customer pictures.

Please be sure to measure your own snowblower slot sizes. Do not use this chart for ordering purposes. The number can be transposed very easily with a chart this large.

We would appreciate any and all information (in your own words), about your snowblower. Not just about the skids, but everything you would like to share. We have a lot of people coming to review different snowblowers, so any information you would like to share, would be appreciated.

Remember to always keep your snowblower off of the concrete when not in use. This helps to prevent rust. A 2×4 works great.

Use These Quick Jump Links: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

Make/Model	Image/Links	Notes:	ARMORskids Control #:
NEW CUT SERIES SKIDS		For Hydraulically Driven Utility Tractors Blowers such as: Bobcat, Meteor, Deere, New Holland, Kioti, Toro, Kubota, Woodmax and more.	CUT-SERIES
Agway 24″ 8HP		24″ 8hp	ASE2475-A

Ariens 30		Ariens 30″ Set at the manual’s suggested 7/8″ height for gravel. Spacers are needed.	ASE0310-B
Ariens 524			ASE0310-B
Ariens 1028			ASE0310-B
Ariens 1968		24″	ASE0310-B
Ariens 11528			ASE0310-B
Ariens 920013		Spacers required due to scraper bar bolt near back. Alternatively some people have used longer bolts and a nut between auger housing and skid shoe. See picture.	ASE0310-B
Ariens 920014		Deluxe ST24LE	ASE0310-B
Ariens 920021			ASE0310-B
Ariens 921020		This uses the same skids as 921022 and 921030.	ASE0310-B
Ariens 920022			ASE0310-B
Ariens 921013		Deluxe ST30LE	ASE0310-B
Ariens 921017		24″	ASE0310-B
Ariens 921022			ASE0310-B
Ariens 921030			ASE0310-B
Ariens 921038			ASE0310-B
Ariens 921045			ASE0310-B
Ariens 921046			ASE0310-B
Ariens 921047			ASE0310-B
Ariens 921049			ASE0310-B
Ariens Deluxe 28		Note that spacers per side are required.	ASE0310
Ariens Deluxe 921024			ASE0310-B
Ariens 28 SHO		Note that spacers per side are required.	ASE0310-B
Ariens 921030			ASE0310-B
Ariens 921031			ASE0310-B
Ariens 921032
Ariens 921037			ASE0310-B
Ariens 924028			ASE0275-A
Ariens 920024			ASE0310-B
Ariens 921048			ASE0310-B
Ariens 921052			ASE0310-B
Ariens ST824 924050			ASE0310-B
Ariens Model 926053		Ariens Model 926053 (HydroPro 28 – 2015) No spacers needed	PRO-0310-B
Ariens 926500
Ariens 926501-ST13336DLE			ASE3575-A
Ariens 932036			ASE0310-B
Ariens 9526 DLEPRO		DLEPRO	ASE0310-B
Ariens Platinum 24			ASE0310-B
Ariens Platinum 28		Ariens Platinum Track 28	ASE0310-B
Ariens Platinum 30			ASE0310-b
Ariens Pro 28″			ASE0310-B
Ariens Pro 36″			ASE0310-B
Ariens Rapid Trak Pro			Pro-XT-3.0″
Ariens ST1032			ASE3575-A
Ariens ST28LE			ASE0310-B
Ariens ST 524		Spacers recommended due to rolled front edge.	ASE0310-B
Ariens ST 928		Ariens ST 928 with Spacers	PRO3575-A
Ariens deluxe 24/2011		24″	ASE0310-B
Ariens snow tek/920402			ASE0310-B
Ariens Sno-Tek 24E #920402			ASE2505-B
Ariens Snow-Tek24E			ASE0310-B

Bercomac 54″		Cut 24 skids for width 3.5″/7″	CUT 24″
Brute 1150			ASE2505-A

Case Snow-Caster k84 (snowblower attachement)		Snowblower attachment	ASE3575-A

Crafstman 247			ASE0275
Craftsman 247.88190			ASE3575-B
Craftsman 247.883700		26′ Snow Thrower Model No. 247.883700	ASE0275
Craftsman 247.883700			ASE0275
Craftsman 247.883961		Craftsman 247.883961 30″
Craftsman 247.88455.1		5.5hp 24″	ASe0275
Craftsman 247.886640			ASE0275
Craftsman 247.887791		22″	ASE0275
Craftsman 247.88830			ASE3575-B
Craftsman 247.88955
Craftsman 247.88970			ASE0275
Craftsman 247.88890			ASE3575-B
Craftsman 247.88999
Craftsman 247.881731			ASE0275-A
Craftsman 24837 Craftsman 486.248371		The snow blower is a Sears Craftsman 42 inch, Two-Stage Snow Thrower for mounting on lawn tractors, Model number 24837 or 486.248371	ASE2505-B
Craftsman 30″		Craftsman 30″ 357 cc Model 88396 Electric Chute Two-Stage Snow Blower.	ASE3575-B
Craftsman 486.24839			ASE2475-B
Craftsman 536.881110			ASC2475-A
Craftsman 536.811650		6.5hp, 24” (w/ a 2” skid bolt pattern) Model # 536.811650 and 536.881110	ASE2475-A
Craftsman 536.881851		8hp 27″	ASE2475-A
Craftsman 536.881851			ASE2475-A
Craftsman-536-887990			ASE2475-A
Craftsman 536.887992		29 inch, 9 horsepower	ASE2475-A
Craftsman 536.887993			ASE2475-A
Craftsman 536.887994			ASE2475-A
Craftsman 536.887996			ASE2475-A
Craftsman 88105		1/2″ Spacing 10.5 HP OHV/30	ASE1545-A
Craftsman 88173		24″ 208cc	ASE0275-A
Craftsman 88690		28″	ASE0310-B
Craftsman 88957		24″ 179cc	ASE0275
Craftsman 889702			ASE3575-B
Craftsman 944.520661			ASE2505-A
Craftsman C950-52915-0		Craftsman C950-52915-0	ASE-2475-

Cub Cadet 19A40024100		3X 42″ snow blower attachment	Pro-XT 3575-B
Cub Cadet 3X26 HD		3 Stage Power. There are notes regarding this particular model. Please click on the image to the left to go to that page.	Pro-3575-B
Cub Cadet 3X28		357CC Snow Blower	Pro-XT-1545-B
Cub Cadet 3X-3		The new Cub Cadet 3 stage machines have mounting bolts higher than older models. We’ve developed an extra tall version of our Pro Series in three frequently requested sizes. The XT size is bases off our Pro Series 1/2″ thick bottom runner, and is 5 inches tall to give plenty of adjustment for those machines that have these issues with the regular series Armorskids®. –Bob	Pro-XT-1545-A
Cub Cadet 3X30		The new Cub Cadet 3 stage machines have mounting bolts higher than older models. We’ve developed an extra tall version of our Pro Series in three frequently requested sizes. The XT size is bases off our Pro Series 1/2″ thick bottom runner, and is 5 inches tall to give plenty of adjustment for those machines that have these issues with the regular series Armorskids®. –Bob	Pro-XT-3575-B
Cub Cadet 3×42		Attached to a XT2 lawn tractor…	PRO-XT3575-B
Cub Cadet 31AM59SS596		Cub Cadet 31AM59SS596
Cub Cadet 450		2072 Super Garden Tractor	ASE9275-B
Cub Cadet 524 WE		2 Stage Power	Pro-XT-1545-A
Cub Cadet 524 SWE			Pro-XT-3575-B
Cub Cadet 526 SWE			Pro-XT-3575-B
Cub Cadet 528			Pro-XT-1545-B
Cub Cadet 628-SWE			Pro-XT-1545-B
Cub Cadet 724E			ASE0275
Cub Cadet 826t			ASE0310-B
Cub Cadet 945 SWE		Has 9″ bolts from first bolt to third bolt.	ASE9575-C

EGO 2400		Battery Powered EGO Brand 2400	ASE0310-B

Honda HS80		I have limited information on this machine. I think this has 2 3/8″ bolt spacing.	ASE2425-C
Honda HS55		On the HS55 the skids are mounted on struts behind the housing. The new skids are way to large to fit in the original position. So I removed the old struts and skids and mounted the new skids to the main blower housing. I only had to drill one new hole for each skid, the second bolt was already there and available. Installation was quite quick.	ASE2425-C
Honda HS 724		Shown with the new Pro-Hond-2425-A skids. Note the new design gives a large clearance area for the back scraper bar bolt. However a couple people have reported needing a little more clearance for the scraper bar bolt. These people all had their skids adjusted all the way up to put their scraper bar down quite close to the ground for smooth new concrete. They report that the bolt still blocked them from doing so. So note that if additional clearance is needed, a moment or two with a grinder would take care of this.	Pro-HOND-2425-A
Honda HS828		Verify that you have mounting holes on the side of the auger housing. Some machines came with them, others did not. These holes are required to mount skids on side of auger housing. Spacers are required due to scraper bar bolt near back. Alternatively some people have used longer bolts and a nut between auger housing and skid shoe. Click on picture for more photos.	ASE2425-C
HONDA 928’s	NOTES >	We don’t yet have pictures of the new skid on this machine. The pictures show the old recommended skid. See the pics on the 724 above. I recommend our new PRO-HON-2425-C. Thank you. Note the new design gives a large clearance area for the back scraper bar bolt. However a couple people have reported needing a little more clearance for the scraper bar bolt. These people all had their skids adjusted all the way up to put their scraper bar down quite close to the ground for smooth new concrete. They report that the bolt still blocked them from doing so. So note that if additional clearance is needed, a moment or two with a grinder would take care of this.	Pro-Hond-2425-c
Honda HS928		Verify that you have mounting holes on the side of the auger housing. Some machines came with them, others did not. These holes are required to mount skids on side of auger housing. Original skids that sit behind the housing may be retained. Spacers are required due to scraper bar bolt near back. Alternatively some people have used longer bolts with a nut between auger housing and skid shoe. I do not have pictures of the 928 yet. See photos of 828 which is similar.	PRO-HON-2425-C
Honda HS928K1TAS			PRO-HON-2425-C
Honda HSS928		Todd used 3 spacers on his Honda HSS928. This machine takes the PRO-HON-2425-C skid. He’s using them on gravel and grass so he has them raised up to the max in this photo.	PRO-HON-2425-C
Honda HSS928AWD			PRO-HON-2425-A
Honda HS1132 TA		There was a little confusion at first because the Honda 1132 housing came two different ways, one with pre-drilled holes and one without. But Bob sorted it all out. I am posting here just to add to your recognition of Bob’s honest and good service.
Honda HS1332		Spacers required. Some people have used longer bolts and a nut or washers between auger housing and skid shoe. Click on picture for more photos.	PRO-HON-2425-C

Husqvarna 531-30 71-69		Pro-XT-250-B pictured. Shows wide range of adjustment available for the perfect setup for your own unique situation.	Pro2505-B
Husqvarna 1130sbexp			ASE1545-A
Husqvarna 11524E
Husqvarna 1252HV			ASE2505-A
Husqvarna 12527HVX			Pro2505-A
Husqvarna 1830EXLT			ASE2505-A
Husqvarna 1830HV			ASE2505-A
Husqvarna 5524ste			ASE2505-A
Husqvarna ST224		2.5″ slot spacing	ASE2505-A
Husqvarna ST227P			ASE2505-A
Husqvarna ST230E			ASE2505-A
Husqvarna ST230 P		No spacers needed.
Husqvarna ST324P		(2.5 inch slot spacing).	ASE2505-A
Husqvarna ST330P		Used on asphalt driveway and washed stone/gravel parking lot. Needs a longer bolt (by about ¼ inch) – (4 total) also, some spacers are needed, to mount the skid shoe to a flush surface.	ASE2505-A

Jacobsen/Ford LGT 165		41″ single stage

John Deere 44		Note: picture is of the Pro series,Mounted on a 44″ tractor-mounted snowblower with a John Deere tractor. I recommend the Pro1545XT-B, it’s same skid design, with more height. The pro series is 3.5″ to top edge, where the Pro-XT series is 5″ to top of skid.	Pro1545XT-B
John Deere #46		Does NOT fit due to massive flare on outside of blower housing.	N/A
John Deere 47″		Mounted on a X534 Tractor. I recommend the Pro1545XT-B, it’s same skid design, with more height. The pro series is 3.5″ to top edge, where the Pro-XT series is 5″ to top of skid.	Pro1545XT-B
John Deere 47″		For Blower Attachment	ASE9575-C
John Deere 522		Customer DavidB says “This model has 2.5″ bolt spacing and your product fits perfectly. I realized after mounting and taking the photo that I need to swap sides to put the narrow end forward for use on our concrete driveway. Anyway… great product and great delivery!! Bring on the snow!”	ASE2505-A
John Deere 826			ASE2475-A
John Deere 828D			ASE0310-B
John Deere 1028E			ASE2505-A
John Deere 1128de			ASE0310-B
John Deere 1130SE			ASE2505-A
John Deere 1330SE			ASE2505-A
John Deere 16342		John Deere 16342 – LA130	ASE9545-C
John Deere 23045		John Deere SKU 23045	ASE1545-B
John Deere TRS24			ASE2475-A
John Deere TRS27			ASE2475-A
John Deere TRS32			ASE2475-A
John Deere x500			ASE1545-B
John Deere 540X MT		47″	ASE9545-C
John Deere 42″ Blower
John Deere 59″ Blower		4.75″ on center	C.U.T. 24
John Deere TRX-24			ASE2475-A
John Deere D170			ASE9545-C

Jonsered ST 2376 EB		30″ 2 ½ inch centers	ASE2505-A

Kioti CS-2410		The blower is a Kioti KS50 The factory skids (a $125 option, stock it just rides on the edge of the housing!!!) wore out in one season and were absurdly small for the size of the blower.	ASE1545-C
Kioti KS50		Kioti KS50-160FM	C.U.T. 24″
Kioti KS54		Kioti KS54-180FM	C.U.T. 24″

Kubota 2660		Kubota BL2660 (60″). This 3-point mounted pto machine weighs about 450 lbs. It has the standard Kubota 2 1/8″ bolt spacing. I do not have a good picture of the skids mounted on a BL2660 yet.	C.U.T. 24″ Kubota
Kubota B2782		Kubota B2782 (63″)	C.U.T. 24″ Kubota
Kubota 5450 / BX5450		I just got the skids, all I can is WOW!!!! Pictures don’t do them justice. I went ahead and put them on and fit perfect.	PRO2425-A OR CUT 24″
Kubota B2781B		CUT 24″ Series for Kubota, and mounted on a Kubota B2781B blowers.	C.U.T. 24″
Kubota BL2664 3 Point		Here are some photos installed. I had to put some 3/16″ spacers behind them so they could clear the wings. These are temporary since i would like to use 5×8 3/16″ plates (painted) for the final configuration. That will come later though. I’m anxious to try them out. They should help considerably.	CUT24KUB2.125
Kubota BX2816 / 23S			ASE9255-A
Kubota GR2846A			PRO-XT-2505-B

Lambert HS2540			ASE3575-A
Lawn Boy		Lawn Boy #522R model 28230

Little Wonder Vacuum		Little Wonder Leaf Vacuum	ASE0650-A

LS Snowblower		Tractor-Mounted LS Brand Snowblower LW3174A-74	C.U.T. 30″ 6.5

Mahindra		Mahindra Snowblower Skid 54″	C.U.T. 24″
Massey 2360		Massey 2360 Snowblower Attachment	C.U.T. 24″
Mastercraft 10.5HP (MTD)		10.5 hp	ASE0275


Meteor 51			C.U.T. Series 24″

MTD 190-032		I recommend the 9000 series for this machine.	ASE9575-B
MTD 190-823			PRO-3575-B
MTD 300 Series
MTD 31AE640F161			ASE0275
MTD 31AS6FEF700			ASE0275
MTD 31A62BD700			ASE0275-A
MTD 316611			ASE0275
MTD 317-611d118			ASE0275
MTD Yard Machines Series 500-600			ASE0275
MTD 524			ASE0275
mtde660g			ASE0275
26″ Yard Machine by MTD		26″	ASE0275
MTD 5/21			ASE0275
MTD 8/26			ASE0275
MTD/Troy Built 190-823-101			ASE3575-B
Yard Machine 31AE6A4E129			ASE3575-B
MTD Yard Machine 31A-E662H013			ASE0275-A
MTD YardWorks 31AE6MKH515		10.5 HP 30″
MTD Yard Machine 31aj11d129			ASE0310-B
MTD Yard Machines 31am63ef 700			ASE0275
MTD Yard Machines 31as6fee729			ASE0275-B

Murray 27 inch 627809x5A		27″	ASE2505-A

Nomar G2794010			ASE2505-A

NOMAR27″/ 627104X8		27″	ASE2505-A

Poulan Pro PR242			ASE2505-A
Poulan Pro PR624ES		More notes on the page. Click the thumbnail	ASE1545-A
Poulan Pro XT11530ES			ASE1545-A

Power Smart DB765922		22″ 2 Stage Electric

Quality Pro (mtd)		MTD	ASE0275

Sears 247.886510			ASE0310-B
Sears 944.529201			ASE1545-A

Simplicity 860 SE
Simplicity 870			ASE2505-A
Simplicity 7/55			ASE2505-A
Simplicity 1690169			ASE2505-A
Simplicity 1694241			ASE2505-A
Simplicity 1428L			ASE2505-A
Simplicity 1691900 860se			ASE2505-A
Simplicity 860se			ASE2505-A
Simplicity M1227e		Simplicity M1227e / 1696819
Simplicity P1524E			ASE2505-A

Snapper L1226E		He’s using the 2.5″ bolt pattern slots.	ASE505
Snapper 1227
Snapper 1030			ASE0310
Snapper 8246			ASE9310-A
Snapper 9226 E			ASE0310-B

Snow Joe		Snow Joe 2 Stage 100 Volt Snowblower	ASE0310-B

Toro 521		This Rocks!
Toro 1132 Before 1991		The Toro 1132 Powershift Snowblower (up to 1991) used a 2.5″ bolt pattern, and can use the ASE2505-A the Pro-2505-A.
Toro 1132 After 1991		The Toro 1132 Powershift Snowblower (after 1992 and newer) takes the ASE0310-D or the PRO-0310-D
Toro 38051		Also fits Lawn Boy 522R
Toro 38052			ASE2475-A
Toro 38614			ASE0275
Toro 726OE			ASE0310-B
Toro Powermax 724 OE		The ASE0310 skids at 3.00 inch spacings work great on my Toro Powermax 724 OE snowblower that I bought in 2017…	ASE0310
Toro Powermax 728LXE		Has skids set back on auger housing. See notes and pictures. May require adjustment of scraper bar. Feedback and pictures required if you order this, as it’s still in development.	ASE0310-D
Toro 824			ASE0310-D
Toro 826 LE			ASE0310-D
Toro 826OXE			ASE0310-D
Toro Powermax 828LXE		Has skids set back on auger housing. See notes and pictures. May require adjustment of scraper bar. Feedback and pictures required if you order this, as it’s still in development.	ASE0310-D
Toro 926 OXE		I used approximately 2” washers for spacers between the skids and the snow blower side plate. One at each bolt. I adjusted the skid height so there would be approximately an inch bottom of skid to bottom of blower. I may have to make more adjustments when I actually do some blowing.	ASE0310-D
Toro 928 OHXE		See picture of ase0310-d mounted. You probably want to use the spacer kit due to a flange at the front of the auger housing.	ase0310-D
Toro Lawn-Boy #522R
Toro Powermax 1028OHXE		Has skids set back on auger housing. See notes and pictures. May require adjustment of scraper bar. Feedback and pictures required if you order this, as it’s still in development.	ASE0310-D
Toro 1128 OXE			ASE0310-D
Toro 38051		Also fits Lawn Boy 522R
Toro 38052			ASE2475-A
Toro 38614			ASE0275
Toro SnowMaster 724QXE		Toro SnowMaster 724QXE model 36001 Shim kit (spacers) mandatory to clear the stampings.	ASE2505-A
Toro SnowMaster 724 ZXR		Shim kit (spacers) mandatory to clear the stampings.	PRO2505-A
Toro snowmaster-824-QXE-36003		Toro snowmaster-824-QXE-36003	ASE2505-A
Troy-Bilt Arctic Storm XP 34”		Model Number: 31AH8ER6766	Pro-XT-3575
Troy-Bilt Flex 26		Troy-Bilt Flex 26″	ASE0275
Troy-Bilt Polar Blast 13045		45″ Wide	ASE9575-C
Troy-Bilt Storm 2410			ASE0275-A
Troy-Bilt Storm 2620		26″	ASE0275-A
Troy-Bilt Storm 2625
Troy-Bilt Storm 2840			ASE3575-B
Troy-Bilt Storm 3090 XP		Home Use: ASE3575-B Commercial Use: Pro3575-B.
Troy-Bilt 45			ASE9575-C
Troy-Bilt Storm 5524			ASE0310-B
Troy-Bilt 31AS62N2711			ASE0275-A
Troy-Bilt/Lowes 31AS62N2711		Lowes	ASE0275-A
Troy-Bilt 31BM63P3711		26″	ASE0275-A
Troy-Bilt 33			ASE1545-B
Troy-Bilt Storm 5524 31AS6BN2711			ASE0275-A
Troy-Bilt Storm 3090xp		ase3575b or pro3575b.	ASE3575-B
Troy-Bilt 31AS6BN2711		24″ 179cc	ASE0275-A
Troy-Bilt Storm 9528		28″ Clearing	ASE0275-A
Troy-Bilt Vortex Tracker 2890		5.75″ bolt pattern	ASE3575-B

Versatile V-48			ASE3575-A

Bob’s Snowblower
White 800ST			ASE0275-A

Woodmax		C.U.T. 30″ long and 8.5 slot spacing Un-Painted	C.U.T.30 8.5″

Yardworks/Yardmachines		SEE MTD	ASE0275-A

Use These Quick Jump Links: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

Click on a thumbnail/image to see more customer pictures.
Please be sure to measure your own snowblower slot sizes. Do not use this chart for ordering purposes. Number can be transposed very easily with a chart this large.