2 Sets of slots are on this skid:
2-1/4″ Slot Size (some people measure 2-3/8″ which will fit) (Measured from center of slot to center of other slot.)
4-1/4″ Slot Size (Measured from center of slot to center of the other slot.)
Here’s the situation with some Honda snowblowers, such as the HS1332 machine. There is a back scraper bar bolt that slides up and down at a 45° angle. The skid mounts just ahead of it. So the old method was to use 2 sets of spacers, to space out each side a full 1/2″ to clear that back bolt.
This new Pro-Hon skid listed above has a large cutout that clears that back scraper bar bolt. This allows for the skid to mount without the need for spacers. I developed this skid using the pro series bottom runner for strength since it wouldn’t have as much support from the vertical rib. I also increased the thickness of the vertical rib from 1/8″ to 3/16″ thick, to resist bending due to less steel. This skid is a beast, it’s the strongest skid I’ve ever made. It’s the one you want.
Note1: There are some machines that may still have some slight interference with back bolt. If so, a moment with a grinder will take care of it.
Note2: Due to wider slots, you HAVE to use some good (grade 5 or grade 8) washers, which are NOT included.
Note: Our Patented Skids are Black.