2.78” (2.875) Slot Spacing

Price per set: $74.99

Shipping: $9.00

Total: $83.99

Snowblower Make/Model Number: 


Bob’s Comments:


2 7/8” (2.875″) Slot Spacing (Measured from Center of slot to center of other slot.)

NEW FOR TORO with offset bolt spacing!!!

This skid size has 6 slots. This skid is designed to use slots 1 and 3. The skid bolts are way back on the skid. The skid itself sticks forward to protect the leading edge of the auger housing. Note that this size is still being tested, so I ask that you only order this set if you will give me feedback and photos on how it fits. Note that one person mentioned that they needed to put the scraper bar all the way down, and set my skids partway down in order to have them cover the front edge of the auger housing. Two others said they didn’t encounter this issue at all. So as you can see, this is a work in progress. For pictures of these skids mounted up on a machine, check out the make/model lookup page. Slots are designed to have a slightly loose fit on a 5/16 bolt. If you have a 3/8 bolt, note that you will need to slightly modify the bolt to mount in the narrower slot. New bolts and washers not included. Please fill in the make and model number (example: Deere 8661). I’m putting together a chart that will hopefully aide people in selecting the correct size.

Note: Our Patented Skids are Black.

CLICK HERE TO ORDER: SPC0300 1/8″ Thick Spacers

If you need spacers, this pack of 4 spacers should solve almost all clearance issues.