Make/Model |
Thumbnail Links |
Notes: |
ARMORskids Control #: |
NEW CUT SERIES SKIDS |
 |
For Hydraulically Driven Utility Tractors Blowers and Bobcats |
CUT-SERIES |
Agway 24″ 8HP |
|
24″ 8hp |
ASE2475-A |
|
|
|
|
Ariens 30 |
 |
Ariens 30″ Set at the manual’s suggested 7/8″ height for gravel. Spacers are needed. |
ASE0310-B |
Ariens 524 |
|
|
ASE0310-B |
Ariens 1028 |
|
|
ASE0310-B |
Ariens 1968 |
|
24″ |
ASE0310-B |
Ariens 11528 |
|
|
ASE0310-B |
Ariens 920013 |
 |
Spacers required due to scraper bar bolt near back. Alternatively some people have used longer bolts and a nut between auger housing and skid shoe. See picture. |
ASE0310-B |
Ariens 920014 |
|
Deluxe ST24LE |
ASE0310-B |
Ariens 920021 |
 |
|
ASE0310-B |
Ariens 920022 |
|
|
ASE0310-B |
Ariens 921013 |
|
Deluxe ST30LE |
ASE0310-B |
Ariens 921017 |
 |
24″ |
ASE0310-B |
Ariens 921022 |
|
|
ASE0310-B |
Ariens 921030 |
|
|
ASE0310-B |
Ariens 921038 |
|
|
ASE0310-B |
Ariens 921045 |
|
|
ASE0310-B |
Ariens 921046 |
|
|
ASE0310-B |
Ariens 921047 |
|
|
ASE0310-B |
Ariens 921049 |
|
|
ASE0310-B |
Ariens Deluxe 28 |
 |
Note that spacers per side are required. |
ASE0310 |
Ariens Deluxe 921024 |
 |
|
ASE0310-B |
Ariens 28 SHO |
|
Note that spacers per side are required. |
ASE0310-B |
Ariens 921030 |
 |
|
ASE0310-B |
Ariens 921031 |
|
|
ASE0310-B |
Ariens 921032 |
 |
|
|
Ariens 921037 |
|
|
ASE0310-B |
Ariens 924028 |
|
|
ASE0275-A |
Ariens 920024 |
|
|
ASE0310-B |
Ariens 921048 |
|
|
ASE0310-B |
Ariens 921052 |
|
|
ASE0310-B |
Ariens ST824 924050 |
|
|
ASE0310-B |
Ariens 926500 |
 |
|
|
Ariens 926501-ST13336DLE |
|
|
ASE3575-A |
Ariens 932036 |
|
|
ASE0310-B |
Ariens 9526 DLEPRO |
|
DLEPRO |
ASE0310-B |
Ariens Platinum 24 |
|
|
ASE0310-B |
Ariens Platinum 30 |
 |
|
ASE0310-b |
Ariens Pro 28 |
|
|
ASE0310-B |
Ariens ST1032 |
|
|
ASE3575-A |
Ariens ST28LE |
|
|
ASE0310-B |
AriensST 524 |
|
Spacers recommended due to rolled front edge. |
ASE0310-B |
Ariens deluxe 24/2011 |
|
24″ |
ASE0310-B |
Ariens snow tek/920402 |
|
|
ASE0310-B |
Ariens Sno-Tek 24E #920402 |
|
|
ASE2505-B |
Ariens Snow-Tek24E |
|
|
ASE0310-B |
|
|
|
|
Brute 1150 |
|
|
ASE2505-A |
|
|
|
|
Case Snow-Caster k84 (snowblower attachement) |
|
Snowblower attachment |
ASE3575-A |
|
|
|
|
Crafstman 247 |
 |
|
ASE0275 |
Craftsman 247.88190 |
 |
|
ASE3575-B |
Craftsman 247.883700 |
|
26′ Snow Thrower Model No. 247.883700 |
ASE0275 |
Craftsman/247.883700 |
|
|
ASE0275 |
Craftsman 247.88455.1 |
|
5.5hp 24″ |
ASe0275 |
Craftsman 247.886640 |
|
|
ASE0275 |
Craftsman 247.887791 |
|
22″ |
ASE0275 |
Craftsman 247.88830 |
 |
|
ASE3575-B |
Craftsman 247.88955 |
 |
|
|
Craftsman 247.88970 |
|
|
ASE0275 |
Craftsman 247.88890 |
|
|
ASE3575-B |
Craftsman 247.88999 |
 |
|
|
Craftsman 247.881731 |
|
|
ASE0275-A |
Craftsman 24837 Craftsman 486.248371 |
 |
The snow blower is a Sears Craftsman 42 inch, Two-Stage Snow Thrower for mounting on lawn tractors, Model number 24837 or 486.248371 |
ASE2505-B |
Craftsman 30″ |
|
Craftsman 30″ 357 cc Model 88396 Electric Chute Two-Stage Snow Blower. |
ASE3575-B |
Craftsman 486.24839 |
|
|
ASE2475-B |
Craftsman 536.881110 |
|
|
ASC2475-A |
Craftsman 536.811650 |
 |
6.5hp, 24” (w/ a 2” skid bolt pattern) |
ASE2475-A |
Craftsman 536.881800 |
 |
8hp 27″ |
ASE2475-A |
Craftsman 536.881851 |
|
|
ASE2475-A |
Craftsman-536-887990 |
 |
|
ASE2475-A |
Craftsman 536.887992 |
|
|
ASE2475-A |
Craftsman 536.887993 |
 |
|
ASE2475-A |
Craftsman 536.887994 |
 |
|
ASE2475-A |
Craftsman 536.887996 |
|
|
ASE2475-A |
Craftsman 88105 |
 |
1/2″ Spacing 10.5 HP OHV/30 |
ASE1545-A |
Craftsman 88173 |
 |
24″ 208cc |
ASE0275-A |
Craftsman 88690 |
|
28″ |
ASE0310-B |
Craftsman 88957 |
|
24″ 179cc |
ASE0275 |
Craftsman 889702 |
|
|
ASE3575-B |
Craftsman 944.520661 |
|
|
ASE2505-A |
|
|
|
|
Cub Cadet 3X26 HD |
 |
3 Stage Power. There are notes regarding this particular model. Please click on the image to the left to go to that page. |
Pro-3575-B |
Cub Cadet 3X28 |
 |
357CC Snow Blower |
Pro-XT-1545-B |
Cub Cadet 3X-3 |
 |
The new Cub Cadet 3 stage machines have mounting bolts higher than older models. We’ve developed an extra tall version of our Pro Series in three frequently requested sizes. The XT size is bases off our Pro Series 1/2″ thick bottom runner, and is 5 inches tall to give plenty of adjustment for those machines that have these issues with the regular series Armorskids®.
–Bob |
Pro-XT-1545-A |
Cub Cadet 3X30 |
 |
The new Cub Cadet 3 stage machines have mounting bolts higher than older models. We’ve developed an extra tall version of our Pro Series in three frequently requested sizes. The XT size is bases off our Pro Series 1/2″ thick bottom runner, and is 5 inches tall to give plenty of adjustment for those machines that have these issues with the regular series Armorskids®.
–Bob |
Pro-XT-3575-B |
Cub Cadet 31AM59SS596 |
 |
Cub Cadet 31AM59SS596 |
|
Cub Cadet 450 |
 |
2072 Super Garden Tractor |
ASE9275-B |
Cub Cadet 524 WE |
 |
2 Stage Power |
Pro-XT-1545-A |
Cub Cadet 524 SWE |
 |
|
Pro-XT-3575-B |
Cub Cadet 526 SWE |
 |
|
Pro-XT-3575-B |
Cub Cadet 528 |
 |
|
Pro-XT-1545-B |
Cub Cadet 628-SWE |
|
|
Pro-XT-1545-B |
Cub Cadet 724E |
|
|
ASE0275 |
Cub Cadet 826t |
|
|
ASE0310-B |
Cub Cadet 945 SWE |
|
Has 9″ bolts from first bolt to third bolt. |
ASE9575-c |
|
|
|
|
Honda HS55 |
 |
On the HS55 the skids are mounted on struts behind the housing. The new skids are way to large to fit in the original position. So I removed the old struts and skids and mounted the new skids to the main blower housing. I only had to drill one new hole for each skid, the second bolt was already there and available. Installation was quite quick. |
ASE2425-C |
Honda HS828 |
 |
Verify that you have mounting holes on the side of the auger housing. Some machines came with them, others did not. These holes are required to mount skids on side of auger housing. Spacers are required due to scraper bar bolt near back. Alternatively some people have used longer bolts and a nut between auger housing and skid shoe. Click on picture for more photos. |
ASE2425-C |
HONDA 928’s |
NOTES > |
02-15-2018 We updated the recommendation to the new skid, which avoids the rear scraper bar bolt. We don’t yet have pictures of the new skid on this machine. The pictures show the old recommended skid. The new skid size you need is our: PRO-HON-2425-C. Thank you. |
|
Honda HS928 |
 |
Verify that you have mounting holes on the side of the auger housing. Some machines came with them, others did not. These holes are required to mount skids on side of auger housing. Original skids that sit behind the housing may be retained. Spacers are required due to scraper bar bolt near back. Alternatively some people have used longer bolts with a nut between auger housing and skid shoe. I do not have pictures of the 928 yet. See photos of 828 which is similar. |
PRO-HON-2425-C |
Honda HS928K1TAS |
 |
|
PRO-HON-2425-C |
Honda HSS928 |
 |
Todd used 3 spacers on his Honda HSS928. This machine takes the ASE2425-A skid. He’s using them on gravel and grass so he has them raised up to the max in this photo. |
PRO-HON-2425-C |
Honda HS1132 TA |
|
There was a little confusion at first because the Honda 1132 housing came two different ways, one with pre-drilled holes and one without. But Bob sorted it all out. I am posting here just to add to your recognition of Bob’s honest and good service. |
|
Honda HS1332 |
 |
Spacers required. Some people have used longer bolts and a nut or washers between auger housing and skid shoe. Click on picture for more photos. |
PRO-HON-2425-C |
|
|
|
|
Husqvarna 531-30 71-69 |
 |
Pro-XT-250-B pictured. Shows wide range of adjustment available for the perfect setup for your own unique situation. |
Pro2505-B |
Husqvarna 1130sbexp |
|
|
ASE1545-A |
Husqvarna 11524E |
 |
|
|
Husqvarna 1252HV |
|
|
ASE2505-A |
Husqvarna 12527HVX |
 |
|
Pro2505-A |
Husqvarna 1830EXLT |
|
|
ASE2505-A |
Husqvarna 1830HV |
|
|
ASE2505-A |
Husqvarna 5524ste |
|
|
ASE2505-A |
Husqvarna ST224 |
 |
2.5″ slot spacing |
ASE2505-A |
Husqvarna ST227P |
 |
|
ASE2505-A |
Husqvarna ST230E |
 |
|
ASE2505-A |
Husqvarna ST230 P |
 |
No spacers needed. |
|
Husqvarna ST324P |
|
(2.5 inch slot spacing). |
ASE2505-A |
Husqvarna ST330P |
 |
Used on asphalt driveway and washed stone/gravel parking lot. Needs a longer bolt (by about ¼ inch) – (4 total) also, some spacers are needed, to mount the skid shoe to a flush surface. |
ASE2505-A |
|
|
|
|
Jacobsen/Ford LGT 165 |
 |
41″ single stage |
|
|
|
|
|
John Deere 44 |
 |
Mounted on a 44″ tractor-mounted snowblower with a John Deere tractor. |
Pro1545-B |
John Deere #46 |
|
Does NOT fit due to massive flare on outside of blower housing. |
N/A |
John Deere 47″ |
 |
Mounted on a X534 Tractor. |
ASE1545-B |
John Deere 47″ |
 |
For Blower Attachment |
ASE9575-C |
John Deere 522 |
 |
Customer DavidB says “This model has 2.5″ bolt spacing and your product fits perfectly. I realized after mounting and taking the photo that I need to swap sides to put the narrow end forward for use on our concrete driveway. Anyway… great product and great delivery!! Bring on the snow!” |
ASE2505-A |
John Deere 826 |
 |
|
|
John Deere 828D |
 |
|
ASE0310-B |
John Deere 1028E |
 |
|
ASE2505-A |
John Deere 1128de |
|
|
ASE0310-B |
John Deere 1130SE |
|
|
ASE2505-A |
John Deere 1330SE |
 |
|
ASE2505-A |
John Deere 16342 |
 |
John Deere 16342 - LA130 |
ASE9545-C |
John Deere 23045 |
|
John Deere SKU 23045 |
ASE1545-B |
John Deere TRS24 |
 |
|
ASE2475-A |
John Deere TRS27 |
 |
|
ASE2475-A |
John Deere TRS32 |
 |
|
ASE2475-A |
John Deere x500 |
|
|
ASE1545-B |
John Deere 540X MT |
 |
47″ |
ASE9545-C |
John Deere 42″ Blower |
|
|
ASE1545-B |
John Deere 59″ Blower |
|
|
ASE9575-C |
John Deere TRX-24 |
|
|
ASE2475-A |
John Deere D170 |
|
|
ASE9545-C |
|
|
|
|
Jonsered ST 2376 EB |
 |
30″ 2 ½ inch centers |
ASE2505-A |
|
|
|
|
Kioti CS-2410 |
 |
The blower is a Kioti KS50 The factory skids (a $125 option, stock it just rides on the edge of the housing!!!) wore out in one season and were absurdly small for the size of the blower. |
Cut24 Series or PRO1545XT-C or PRO1545-c |
|
|
|
|
Kubota 2660 |
|
|
ASE0310-B |
Kubota 5450 |
 |
|
PRO2425-A |
Kubota BX2816 / 23S |
 |
|
ASE9255-A |
Kubota GR2846A |
 |
|
PRO-XT-2505-B |
|
|
|
|
Lambert HS2540 |
|
|
ASE3575-A |
|
|
|
|
Mastercraft 10.5HP (MTD) |
|
10.5 hp |
ASE0275 |
|
|
|
|
MTD 190-032 |
|
I recommend the 9000 series for this machine. |
ASE9575-B |
MTD 190-823 |
|
|
ASE0310-B |
MTD 300 Series |
 |
|
|
MTD 31AE640F161 |
|
|
ASE0275 |
MTD 31AS6FEF700 |
|
|
ASE0275 |
MTD 31A62BD700 |
 |
|
ASE0275-A |
MTD 316611 |
|
|
ASE0275 |
MTD 317-611d118 |
|
|
ASE0275 |
MTD Yard Machines Series 500-600 |
|
|
ASE0275 |
MTD 524 |
|
|
ASE0275 |
mtde660g |
|
|
ASE0275 |
26″ Yard Machine by MTD |
|
26″ |
ASE0275 |
MTD 5/21 |
|
|
ASE0275 |
MTD 8/26 |
|
|
ASE0275 |
MTD/Troy Built 190-823-101 |
|
|
ASE3575-B |
Yard Machine 31AE6A4E129 |
|
|
ASE3575-B |
MTD Yard Machine 31A-E662H013 |
 |
|
ASE0275-A |
MTD YardWorks 31AE6MKH515 |
 |
10.5 HP 30″ |
|
MTD Yard Machine 31aj11d129 |
|
|
ASE0310-B |
MTD Yard Machines 31am63ef 700 |
|
|
ASE0275 |
MTD Yard Machines 31as6fee729 |
|
|
ASE0275-B |
|
|
|
|
Murray 27 inch 627809x5A |
|
27″ |
ASE2505-A |
|
|
|
|
Nomar G2794010 |
|
|
ASE2505-A |
|
|
|
|
NOMAR27″/ 627104X8 |
|
27″ |
ASE2505-A |
|
|
|
|
Poulan Pro PR624ES |
|
|
ASE1545-A |
Poulan Pro XT11530ES |
|
|
ASE1545-A |
|
|
|
|
Power Smart DB765922 |
 |
22″ 2 Stage Electric |
|
|
|
|
|
Quality Pro (mtd) |
|
MTD |
ASE0275 |
|
|
|
|
Sears 247.886510 |
|
|
ASE0310-B |
Sears 944.529201 |
|
|
ASE1545-A |
|
|
|
|
Simplicity 870 |
|
|
ASE2505-A |
Simplicity 7/55 |
|
|
ASE2505-A |
Simplicity 1690169 |
|
|
ASE2505-A |
Simplicity 1694241 |
|
|
ASE2505-A |
Simplicity 1428L |
|
|
ASE2505-A |
Simplicity 1691900 860se |
|
|
ASE2505-A |
Simplicity 860se |
|
|
ASE2505-A |
Simplicity M1227e |
|
Simplicity M1227e / 1696819 |
|
Simplicity P1524E |
|
|
ASE2505-A |
|
|
|
|
Snapper L1226E |
 |
He’s using the 2.5″ bolt pattern slots. |
ASE505 |
Snapper 1227 |
 |
|
|
Snapper 1030 |
 |
|
ASE0310 |
Snapper 8246 |
 |
|
ASE9310-A |
Snapper 9226 E |
 |
|
ASE0310-B |
|
|
|
|
Toro 38051 |
|
Also fits Lawn Boy 522R |
|
Toro 38052 |
|
|
ASE2475-A |
Toro 38614 |
|
|
ASE0275 |
Toro 726OE |
|
|
ASE0310-B |
Toro Powermax 728LXE |
|
Has skids set back on auger housing. See notes and pictures. May require adjustment of scraper bar. Feedback and pictures required if you order this, as it’s still in development. |
ASE0310-D |
Toro 824 |
|
|
ASE2475-A |
Toro 826 LE |
 |
|
ASE0310-D |
Toro 826OXE |
 |
|
ASE0310-D |
Toro Powermax 828LXE |
 |
Has skids set back on auger housing. See notes and pictures. May require adjustment of scraper bar. Feedback and pictures required if you order this, as it’s still in development. |
ASE0310-D |
Toro 926 OXE |
 |
I used approximately 2” washers for spacers between the skids and the snow blower side plate. One at each bolt. I adjusted the skid height so there would be approximately an inch bottom of skid to bottom of blower. I may have to make more adjustments when I actually do some blowing. |
ASE1545-C |
Toro 928 OHXE |
 |
|
|
Toro Lawn-Boy #522R |
 |
Also fits Toro Model #38051 |
|
Toro Powermax 1028OHXE |
 |
Has skids set back on auger housing. See notes and pictures. May require adjustment of scraper bar. Feedback and pictures required if you order this, as it’s still in development. |
ASE0310-D |
Toro 1128 OXE |
|
|
ASE0310-D |
Toro 38051 |
|
Also fits Lawn Boy 522R |
|
Toro 38052 |
|
|
ASE2475-A |
Toro 38614 |
|
|
ASE0275 |
Toro SnowMaster 724qxe |
 |
Toro SnowMaster 724qxe model 36001
Shim kit (spacers) mandatory to clear the stampings. |
ASE2505-A |
|
|
|
|
Troy-Bilt Arctic Storm XP 34” |
 |
Model Number: 31AH8ER6766 |
Pro-XT-3575 |
Troy-Bilt Flex 26 |
 |
Troy-Bilt Flex 26″ |
ASE0275 |
Troy-Bilt Polar Blast 13045 |
 |
45″ Wide |
ASE9575-C |
Troy-Bilt Storm 2410 |
 |
|
ASE0275-A |
Troy-Bilt Storm 2620 |
 |
26″ |
ASE0275-A |
Troy-Bilt Storm 2625 |
 |
|
|
Troy-Bilt Storm 2840 |
 |
|
ASE3575-B |
Troy-Bilt Storm 3090 XP |
|
Home Use: ASE3575-B
Commercial Use: Pro3575-B. |
|
Troy-Bilt 45 |
 |
|
ASE9575-C |
Troy-Bilt Storm 5524 |
 |
|
ASE0310-B |
Troy-Bilt 31AS62N2711 |
|
|
ASE0275-A |
Troy-Bilt/Lowes 31AS62N2711 |
|
Lowes |
ASE0275-A |
Troy-Bilt 31BM63P3711 |
|
26″ |
ASE0275-A |
Troy-Bilt 33 |
|
|
ASE1545-B |
Troy-Bilt Storm 5524 31AS6BN2711 |
|
|
ASE0275-A |
Troy-Bilt Storm 3090xp |
|
ase3575b or pro3575b. |
ASE3575-B |
Troy-Bilt 31AS6BN2711 |
|
24″ 179cc |
ASE0275-A |
Troy-Bilt Storm 9528 |
 |
28″ Clearing |
ASE0275-A |
Troy-Bilt Vortex Tracker 2890 |
|
5.75″ bolt pattern |
ASE3575-B |
|
|
|
|
Versatile V-48 |
|
|
ASE3575-A |
|
|
|
|
|
|
|
|
White 800ST |
|
|
ASE0275-A |
Yardworks/Yardmachines |
|
SEE MTD |
ASE0275-A |